Address:Floor2,Build B,Sanmin Industrial Zone,Shilongzai,Shiyan sub-district,Baoan District,ShenZhen,China
Product Video
Product Features
Microcomputer IC controls charging process: CC/CV/Trickle charging, to make sure the battery is full charged and won’t be over charged; each slot controls independently; Mixed charging mode.
LCD instantly shows the charging process, battery voltage and batteries type.
Applicable batteries
Compatibility: various kinds of cylindrical chargeable batteries (Diameter: below 33mm, height: 34-72mm)
Charge 3.7V Li-ion, 3.8V Li-ion, 3.2V LiFePO4 and 1.2V Ni-MH/Ni-CD batteries
Adopt Negative voltage control technology to improve charge efficiency.
Protect opposite connection and short circuit. (LCD shows "null".)
Activate automatically for above 0.2V batteries and 0V Li-ion batteries with protection board, which are instantaneous short circuit
For the bad batteries, which cannot be activated, the LCD shows “NULL”.
Stainless steel rail is more durable and smooth.
Worldwide voltage, suitable for the whole world.
Electric Features
AC Features (Adaptor)
AC 100-240V 50/60Hz
DC 12V 7A
Output Features
DC 4.35V±0.02V 2A±50mA*4 1.0A±50mA*6
DC 4.2V±0.02V 2A±50mA*4 1.0A±50mA*6
DC 3.6V±0.02V 2A±50mA*4 1.0A±50mA*6
DC 1.43V±0.02V 2A±50mA*4 1.0A±50mA*6
Charging Instruction Mode
A. If don’t plug in, LCD shows nothing.
B. If don't install the batteries and plug in, LCD shows all the data and then shows “null”.
C. If put the batteries in the slots, the charger recognizes Li-ion and Ni-MH batteries. If there is no any operation with 8 seconds, the charger will charge in present battery type and the LCD shows the charging process, battery voltage, battery type and charging capacity.
D. Within 8 seconds, press “MODE” button to choose batteries' type, namely, "Li-ion 3.7V ", "Li-ion 3.8V", "LiFePO4 3.2V", "Ni-MH/Ni-CD 1.2V".
E. When fully charged, battery symbols stop jumping and LCD shows the voltage.
F. Battery symbol displays dynamically
①Present charging status
②Present battery capacity percentage as follows:
Blank Battery Symbol |
The First Grid Lights |
The Second Grid Lights |
The Third Grid Lights |
The Fourth Grid Lights |
The Fifth Grid Lights |
0%-20% |
20%-40% |
40%-60% |
60%-80% |
80%-99% |
100% |
③When charging, the blank battery grids light gradually.
G. 120s later backlight will decay automatically; press the “MODE” button, the backlight will turn on fully; Press the “SLOT” button, the backlight will be turn off.
USB Instruction Mode
(Only for NO. Slot 1 to 4)
A. When no input, the charger is in portable bank mode.
B. Putting the battery, LCD screen show USB 5V,the backlight lights.
C. Do not putting batteries, after 20 seconds, the charger is about to hibernate.
Charging Control Mode
Ni-MH/Ni-CD
A. Current Control: CC
B. -△V: 5mV
D. Max Voltage: 1.53V
Li-ion/LiFePO4
Current Control: CC-CV
Prev:A2
Next:8H-18650-A